FCU - Fan Coil Units & Variable Flow (PICV & DPCV)

A Fan Coil Unit (FCU) provides heating and/or cooling via a heat exchanger (the coil) and fan. Hot and/or cold water is circulated through a coil within the FCU with a fan passing air across the coil and into the space that is to be temperature controlled.

These units can be found in a number of diverse applications including offices, residential apartments, hospitals, hotels and schools. The FCU heat output is controlled using a control valve linked to the room via a thermostat. This in turn would be connected to a Building Management System (BMS), which controls the throughput of water to the heat exchanger.

As the energy output from the FCU is of a parabolic shape, an equal percentage (EQ%) control characteristic is provided by the control valve, which in turn will provide a linear response (see graph below). FCUs can be provided as a 2 pipe solution (either heating or chilled) or more commonly as a 4 pipe solution (heating and cooling).

Solutions

PICV has become the preferred solution for many designers and installers in recent years. However, the option of using the traditional DPCV method is still available and can suit certain applications.

PICV - Pressure Independent Control Valve

PICV Stand Alone

• Easy to set up
• Straightforward commissioning
• No need for separate Commissioning Set and 2 Port Control Valve

Dominator w/ PICV

• Can be remotely fitted away from the terminal
• Reduced space constraints
• Extended levers available for chilled systems

Dominator PRO w/ PICV

• Direct mounting onto a terminal
• Reduced installation time
• No need for insulation due to mounting over drip tray

CommPac w/ PICV

• Multi-manifold system allowing commissioning of up to 6 FCUs from one location

FCU with PICV

DPCV - Differential Pressure Control Valve

DPCV Stand Alone

• Range of controllable dPs Available
• Available with Companion Valve

Dominator w/ Comm. Set

• Available with either static Commissioning Set or Motobalance
• Available with Strainer
• Extended levers available for chilled systems

Dominator PRO w/ Comm. Set

• Direct mounting onto a terminal
• Reduced installation time
• No need for insulation due to mounting over drip tray

CommPac w/ DPCV

• Multi-manifold system allowing commissioning of up to six FCUs from one location
• Commissioning Sets on each terminal connection

Grouped FCUs protected by a single DPCV